3Adjust the Size of the Window to match your own measurements

Entering your measurements

This Step of the processes allows you to submit the sizes , in Millimetres (mm), that you would like the window manufactured to.

Please change the size of the window to match your own measurements. Click on any size (Shown in millimetres) which appears with either a red arrow above them or just with as numerals with a blue line through (See above).

Amend each size as required, within any minimum or maximum production sizes allowed, which may appear highlighted in a black text box (See above)  

If you enter any size which is above or below the current maximum or minimum a text box will appear (See above).

Certain sizes will be automatically calculated based on other size information shown for each window. These appear as white numerals in a red text box (See above)  

Cill included?

The sizes confirmed will always include any Cill

Manufacturing  and measurement tolerances

Our manufacturing works within tolerances of 2-3mm.

Please ensure the sizes you provide are not tight brickwork opening sizes as your new window may not fit, always allow a tolerance of about minus 10mm in the width and minus 10mm in the height. (Reduce size further if your opening is not square, out of level or has protruding bricks as your new window must be installed square, level and plumb).

Assumptions
We will always assume :

• The normal width for a side opening sash is 600mm, this is measured from the edge of the outer frame to the centre of the mullion (vertical bar). Exceptions: If the window divides into equal parts of less than 650mm (divided by mullions) then your side opener will be set at an equal division. However, if you specify egress hinges it will revert to a 650mm wide section. If you specify easy clean hinges it will revert to a 600mm wide section.
• The normal height of a fanlight sash is 360mm, this is measured from the top of the frame to the centre of the transom (horizontal bar). Georgian bar, diamond and rectangular lead will be laid out according to our best practice.

Need Help?

If you are having any problems or have any questions about the window you want to order please call our Sales Department on 01234 272 445

The lead sash is the side with the handle on, that that will open first.

The colours shown are designed as a guide only, if colour accuracy is vital please ensure you have seen a foil swatch before making your final selection. 

Our uPVC products are available in White or Woodgrain effect

We use 100% virgin uPVC to prevent discolouration and keep your windows looking nice and white for years to come!

Woodgrain Effects

Our Woodgrain finish products (made from uPVC, not timber) feature attractive whorl effects for a more realistic wood appearance than the fake looking lined wood grain pattern that many others often use. This means you get the beautiful look of wood without all the maintenance
 

White Profile	Rose Wood Profile	Golden Oak Profile	Anthracite Grey Profile
Rose Wood on White Profile	Golden Oak on White Profile	Anthracite Grey on White Profile

Please note: Laminated profile is very heat absorbent and is therefore not suitable for sunny or warm locations. Please consider this when surveying your installation.

An external cill is needed to aid the drainage of water out and away from the building to help protect the brickwork. The depth of cill needed will depend on how far back your window is set into the wall.

If the window has a cill as part of the structure of the house, eg. a stone or brick cill, you may not require a cill as there may already be sufficient means of drainage in place.

If you select to include an external Cill as part of your window order, it will be automatically included in the overall height of your window.

150mm and 180mm include Cill End Caps. Stub Cills do not need them and so they are not included.

Push to open windows with secure key locking handles. Windows are supplied with white handles or you can opt for brass effect or chrome handles at extra cost.

Add detail or decoration to give your windows an attractive or traditional appearance with the optional feature of Georgian Bars or Leadwork. Georgian bar, diamond and rectangular lead will be laid out according to our best practice. If you require an alternative Georgian bar layout please get in contact with our sales team before placing the order to discuss your requirements.

Toughened glass must be fitted to windows which are either:
*Within 800mm of the closest floor level.
*Or if within 300mm of a door if within 1500mm of the closest floor level.

All our obscure glass options come with toughened glass as standard.

A highly pigmented, weather resistant, acrylic based paint touch-up pen, which is ideal for accidental scratches, edges and mitre joints. Shake the pen to mix pigment and solvent together and apply directly to surface.