French Doors: Sizes

This is for the size in Millimetres (mm) that you would like the door manufactured to. This size is to include any Cill and will be manufactured to tolerances of 2-3mm. Please ensure the sizes provided are not tight brickwork opening sizes as your new door may not fit, always allow a tolerance of about minus 10mm in the width and minus 10mm in the height. (Reduce size further if your opening is not square, out of level or has protruding bricks as your new door must be installed square, level and plumb).

Assumptions:

1. French doors and a single side panel - the french doors will be set at a minimum of 1200mm to a maximum of 1800mm.
   
   
2. French doors and two side panels - the french doors will be set at a minimum of 1200mm to a maximum of 1800mm.
   
   
3. Door midrail (if applicable) will always be set at 850mm from the bottom of the french door frame or low threshold to the middle of the midrail (horizontal bar).
   
   
4. If a low threshold is required on the french door - no cill can be supplied. Please select no cill option.
   
   
5. If a low threshold is required on the french door that is having side panel (s) the french door and side panel (s) will be made as separate units.
   
   
6. If the french door and / or side panel (s) has a fixed pane above - the fixed pane will be set at 2100mm from the bottom of the outer frame / low threshold to the centre of the transom (horizontal bar). If the overall height of the french door frame including the fixed light above is too short for a 2100mm dimension, we will reduce this dimension accordingly.
   
   
7. Georgian bar, diamond and rectangular lead will be laid out according to our best practise.